Chart Recorder-Case Maintenance

Strip Chart Recorder Removal

1. Pull the upper edge of the top door to open the recorder (A8).

2. Remove the paper roll.

3. Push down  the paper carrier and remove the two screws (40) at the rear of the paper housing.

4. Grasp the recorder at the bottom then pull down and away from the instrument.

Case Separation

1. Remove the Battery Pack, front panel bezel, and strip chart recorder.

2. Turn the paddles connector counterclockwise, then pull to disconnect. Remove the paddles.

3. Remove three screws (40) from the bottom of the instrument, four screws (40) from the rear panel (30), and two screws (40) from the handle.

4. Pull the front case (5) forward.

5. Pull the chassis (7) away from the rear case (6).

Next Page