Clock Setting Procedure-Operation

Clock Setting Procedure

To set the clock which is displayed on the CRT and recorder, do the following:

1. Press TIME/DATE MODE on the rear panel to initiate the clock setting mode. The monitor displays the current clock setting in the lower left corner of the CRT as shown in Figure 2—6. The single minutes field is highlighted.

2. Press TIME/DATE SET on the rear panel to change the single minute setting. Each time the pushbutton is pressed, the value of the field increases by one increment.

3. Press MODE again to advance to the next field. Press SET to select the desired value. Repeat this to set the entire time and date.

4. To exit the clock selling mode, press MODE again after selecting the day field.

Next Section, Trouble Shooting