LifePak Maximum Leakage-Trouble Shooting

WARNING

ELECTRICAL HAZARD. Make sure you are familiar with your test equipment and how to execute these tests. Failure to properly perform these tests could result in not detecting excessive leakage current.

TABLE 3-3 Maximum Leakage Current for 120Vac and 60Hz

NOTE:

1. All tests are conducted in both hot/neutral normal and reverse polarities.

2. Test procedure limits based on AAMI/ANSI Standards with meter inaccuracies factored in.

3. N/A = Not Applicable.

4. Ground resistance: <0.050Q as measured between the rear panel ground stud and the ground pin on the ac power connector (refer to Figure 3-6).

Next Page