LifePak Notes-Trouble Shooting
NOTE:
1. All tests are conducted in both hot/neutral normal and reverse
polarities.
2. Test procedure limits based on IEC Standards with meter inaccuracies
factored in.
3. N/A = Not Applicable.
4. Ground resistance: <0.100Q as measured between the rear panel
ground stud and the ground pin on the ac power connector (refer to
Figure 3-6).
* i = measured current.
NOTE:
After completing the PIP, be sure to restore the Setup Menu option
settings required by the user during normal operation (these settings
were noted when you performed PIP-Setup Menu Settings on page 3-5)
|
