Introduction
Performance Inspection Procedure (PIP)
PIP-Purpose
PIP-Scope and Applicability
PIP-Definitions
PIP-Requirements
PIP-General Instructions
PIP-Physical Inspection
PIP-AC Power
PIP-Battery Charge
PIP-Battery Power
PIP-Setup Menu Settings
PIP-Keypad Test
PIP-Lead Select
PIP-Recorder Speed/Baseline Centering
PIP-ECG Display
PIP-1mV CAL
PIP-CRT Gain/Aspect Ratio
PIP-Heart Rate
PIP-Recorder Annotation/Real Time Clock
PIP-Test Load
PIP-Sync/Sync Annotation
PIP-Recorder/CRT Noise
PIP-Defib Disarm and CHARGE LEDs Check
PIP-Paddle Polarity
PIP-Charge Time
PIP-Energy Dump
PIP-Discharge Control
PIP-Charge Reduction
PIP-Delivered Energy
PIP-Leakage Current
PIP-Checklist
Test and Calibration Procedure (TCP)
TCP-Purpose
TCP-Scope and Applicability
TCP-Definitions
TCP-Requirements
TCP-Voltage Checks
TCP-Low Battery Threshold Checks
TCP-Defibrillator Calibration
TCP-Test Load Calibration
TCP-Charge Time
TCP-Output Waveform
TCP-Display Calibration
TCP-Power Supply Calibration
TCP-Recorder Calibration
TCP-Recorder Frequency Response
TCP-CRT Frequency Response
TCP-ECG Output
TCP-Checklist
Troubleshooting Aids
Error Codes and SERVICE Indicator